10 ports Gigabit Ethernet Switch with 2x 10/100/1000M RJ45 and 8x GE SFP ports- LX9-8SFP

Lightem Systems LX9-8SFP Gigabit Ethernet Switch has two 10/100/1000M UTP ports and eight 1000M SFP sockets. Customer can choose different 1000M SFP module according as his demand, such as 1000Base-T, 1000Base-SX or 1000Base-LX etc. The product is possessed of stable performance, excellent quality and reasonable price with adopting latest IC from USA. It is applicable to use in constructing of Optical Fiber Ethernet.

Features
  • 10-Port 10/100/1000 Mbps GbE Switch
  • Two 10/100/1000M UTP ports and Eight 1000M SFP ports
  • Auto negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex.
  • Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
  • The SFP slot supports 1000M and Full Duplex mode.
  • Supports IEEE 802.3x flow control and broadcast storm protection.
  • Supports VLAN and QoS.
  • Supports max 10K bytes frame.
  • It is low power consume (10W), low heat, and good reliability.

 

Specifications
Parameters Values
Operating System
IEEE802.3/u/z/ab, 10/100/1000Base-T and 1000Base-SX/LX
MAC address table
1K
Frame buffer memory
1MKb
Switch fabric
20G
Connector
UTP:RJ-45, 10/100/1000Mbps ; SFP:1000Mbps
Cable
UTP: Cat.5e or 6 UTP (the max distance up to 100m)
Multimode Fiber: 50/125, 62.5/125µm (the max distance up to 224/550m)
Singlemode Fiber: 8/125, 8.7/125, 9/125µm(the max distance up to 10∼100 km)
Flow control
Full Duplex: IEEE802.3x flow control; Half Duplex: back pressure flow control
LED
SFP1, SFP2, PWR, Link/Act, TP1~TP4 Link/Act
Power
AC220V(100-240V), 50~60Hz; DC: 12V,2A0 ~ +50℃
Operating Temperature
0°C ~ 50°C
Storage Temperature
-20°C ~ 70°C
Humidity
5% ~ 90%
Dimensions (W x H x D)
30(H)×182(W)×101(L)mm

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us