Telecom & Datacom

GPON

Lightem GPON is in compact design and convenient for flexible using, easy to deploy with high performance. It can meet the requirements of equipment performance and compact volume of the room environment. It can also satisfy the requirements of the access network and enterprise network that enhancing the network function, improving the reliability and reducing power consumption.

 

GPON

LGPONT28-4TG

Lightem LGPONT28-4TG follows the ITU-T G.984/G. 988 technical standard.Deployed in operators such as FTTX, VPN, government, enterprise, campus network access etc. Features 1U height for easy installation and maintenance. Supports different types of ONU for operation utilization.

Features
  • Layer 2/3 switching features and Flexible management methods
  • Support multiple link redundancy protocols such as Flex-Link/STP/RSTP/MSTP/ERPS/LACP
  • Support RIP、OSPF、BGP、ISIS and IPV6
  • Safe DDOS and virus attack protection
  • Support Power redundancy backup,Modular power supply
  • Support power failure alarm
  • Type C management interface
Specifications
Chassis
Exchange capacity
104Gbps
Packet forwarding rate
77.376Mpps
Memory and storage
Memory: 512MB, Storage: 32MB
Management port
Console, Type C
Port
16x GPON , 8x 10/100/1000M RJ45 , 4x 10GE SFP+
Weight
≤6.5kg
Fan
AC: 100∼240V 47/63Hz;DC: 36V∼75V
Power consumption
100W
Environment friendly
China ROHS EEE
Dimensions(W*H*D)
440 x 44 x 320 mm
Environment temperature
Working Temperature -15°C - 55°C; Storge temperature:-40°C - 70°C
Environment humidity
10% - 95%,no condensing

LGPONT16-8SFP​

Lightem LGPONT16-8SFP series is a 19″ rackmount GPON OLT with 8 PON ports that meets flexible and fast FTTx access, suiting the scenarios such as sparse/ remote/cost-sensitive area,smart industrial park, commercial building and FTTM, etc.

Features
  • Supports the deployment in diverse scenarios including low density areas, remote areas, sparsely-populated areas and industry parks.
  • Supports FTTM and sharing site/rack with wireless base stations.
  • Supports multiple installation modes, like limited room space,basement, low-voltage room and small rack or cabinet.
  • Supports uplink redundancy protection including LACP STP,RSTP and MSTP, and support RIP&OSPF protocol. Supports link protection.
  • Dramatically saves on investment fees in trunk fibers, pipe engineering, and facilities. Effectively reduce CapEx and OpEx.
Specifications
Performance
Chassis - Uplink Port
Rack
1U 19Inch Standard Box
QTY
8
RJ45(GE)
4
SFP(GE)
2
Chassis - GPON Port
QTY
8
Physical Interface
SFP Slots
Max splitting ratio
1:128
Management Ports
1*10/100/1000BASE-T out-band port, 1*CONSOLE port, 1*USB2.0
Port Forwarding Rate(Mpps)
65.472
PON Port Specification
Transmission Distance
20km
GPON port speed
Upstream 1.244Gbps, Downstream 2.488Gbps
Wavelength
TX 1490nm, RX 1310nm
Connector
SC/UPC
Fiber Type
9/125μm SMF
Supported PON module level
Class B+, C, C+, C++, C+++
Power Consumption
45W.
Dimension (L*W*H)
442mm*319mm*43.6mm
Weight
Net weight of single power: 4.05kg
Working Temperature / Humidity
0°C ~+50°C / 5~90% (non-condensing)
Storage Temperature / Humidity
-40~+85°C / 5~90% (non-condensing)

LFW-GPONONU-4R-2P-2U-DWF

To deliver triple-play services to the subscriber in Fiber-to-the-Home or Fiber-to-the-Premises application, the LFW-GPONONU-4R-2P-2U-DWF GPON ONT incorporates interoperability, key customers’ specific requirements and cost-efficiency. Equipped with ITU-T G.984 compliant 2.5G Downstream and 1.25G Upstream GPON interface, the GPON ONT supports the full of services includingvoice ,video, and high speed internet access. Compliant with standard OMCI definition, LFW-GPONONU-4R-2P-2U-DWF GPON ONT is manageable at remote side and supports the full range FCAPS functions including supervision, monitoring and maintenance.

Features
  • Data :
  • The LFW-GPONONU-4R-2P-2U-DWF Gpon ONT is delivered with 4 10/100/1000 Base-T interface, supporting:
  • Auto-negotiation and MDI/MDIX auto-sensing
  • Built-in layer-2 switch
  • Advanced data features such as VLAN tag manipulation, classification, and filtering
  • Built-in layer-3 routing and residential gateway
  • 2.4GHz 300Mbps + 5GHz 867Mbps WLAN interface
  • USB 2.0 storage
  • Video :
  • The LFW-GPONONU-4R-2P-2U-DWF Gpon ONT supports video contents delivered in the form of data (by multicast or unicast).
  • Voice :
  • The LFW-GPONONU-4R-2P-2U-DWF Gpon ONT can optionally be delivered with two POTS interface port for carrier-grade voice services, supporting:
  • Multiple voice codec
  • Echo Cancelling, VAD, CNG
  • Supporting static or dynamic jitter buffer
  • arious CLASS services – Caller ID, Call Waiting, Call Forwarding, Call Transfer, etc.SIP (RFC3261)
  • MEGACO v2 (H.248)
  • To enable VoIP access, it supports interfacing external IAD box or Home Router withvoice capability through the Ethernet Interface.
Specifications
Optical SPEC
Working wavelength
PON:TX1310,RX1490 ( nm )
The light emitting power
1 ~ +4 (GPON) ( dBm )
The light receiving sensitivity
≥ -27 ( dBm )
Optical fiber connector
PON:SC/UPC
Port - The user side Ethernet ports
4GE
USB / POTS
2 / 2
WiFi
802.11 b/g/n/ac / Internal Antenna
2.4GWiFi
300Mbps
5GWiFi
867Mbps
Power Supply
AV110∼255V→DC12V 1.5A / 2-PIN power adaptor input / Dying Gasp suppor
Power Consumption
less than 12W
Dimension (mm)
250*290*30 mm
Weight
250 g

LGPONU-4R

GPON ONT product is the terminal equipment of a series of GPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, it is based on mature and stable, and high cost-effective GPON technology which adopts high-performance xPON ZTE chipset and has high reliability ,easy management, flexible configuration ,robustness ,good quality service guarantee(Qos). It supports WIFI4 (IEEE802.11b/g/n) and WIFI5 (IEEE802.11ac) concurrently, a WEB system provided simplifies the configuration of the WIFI and connects to INTERNET conveniently for users. The ONU supports two ports for VOIP application.
Features
  • Comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol
  • Support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate
  • Support bidirectional FEC and RS(255,239) FEC CODEC
    Support 32 TCONT and 256 GEMPORT
  • Support AES128 decryption function of G.984 standard
  • Support SBA and DBA dynamically broadband allocation
  • Support the PLOAM function of G.984 standard
    Support Dying-Gasp check and report
  • Support synchronous Ethernet
  • Good interworking with the OLT from different manufacturers,such as HuaWei ,ZTE,Cortina etc
  • Down-link LAN ports: 4*10/100/1000M with auto-negotiation
  • Support the rogue ONU alarm function
  • Support VLAN function
    Operation mode: HGU
  • Support IEEE802.11b/g/n and IEEE802.11ac standard for WIFI
    Antennas gain: 5DBi with external
  • Support: 300Mbps PHY rate IEEE802.11b/g/n, 866Mbps PHY rate IEEE802.11ac
  • Support multiply SSID
  • Multiple encryption methods:WFA,WPA,WPA2,WAPI
  • Two port for VOIP,support H.248 ,SIP protocol optional

 

Specifications
Chassis
Uplink Interface
1 GPON interface,SC single mode single fiber RX 2.488 Gbits/s rate and TX 1.244 Gbits/s rate
Fiber type
SC/APC
Optical power
0~4 dBm Sensitivity:-28 dBm
Wavelength(nm)
TX 1310nm,RX 1490nm
Fiber connector
SC/APC connector
SC/APC connector
4*10/100/1000M auto-negotiation Ethernet interface, RJ45 interface
DC supply interface
Input+12V 1A, footprint:DC0005 ø2.1mm
Power
≤5W
Operating temperature
-5 ~ +55℃
Humidity
10 ~ 85%(non-condensation)
Storage temperature
-30~ +70℃
Dimension(mm)
185*125*32mm(mainframe)
Weight
0.5Kg(mainframe)
Wifi
Antenna
2T2R Mode 5DBI Gain, Frequency: 2.4G
Rate
300Mbps PHY rate, WPS
Encryption methods
WFA, WPA, WPA2, WAPI
VOIP
Voltage and Current Monitoring
The ONT continuously monitors the TIP, RING, and battery voltages and currents via an on-chip Monitor ADC
Power Monitoring and Power Fault Detection
The ONT monitoring functions are used to continuously protect against excessive power conditions
Thermal Overload Shutdown
If the die temperature exceeds the maximum junction temperature threshold,
the device will shut itself down

LGPONU-4R1PWF

Lightem LGPONU-4R1PWF is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier- class FTTH application provides different services access. LGPONU-4R1PWF is based on mature and stable, ost-effective GPON technology. LGPONU-4R1PWF adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance GPON Standard of ITU-TG.984.X and EPON standard of IEEE802.3ah.

Features
  • Support GPON mode and EPON mode.
  • Support Route mode for PPPoE/DHCP/Static IP and Bridge mode
  • Support IPv4 and IPv6 Dual mode
  • Support 2.4G&5.8G WIFI and Multiple SSID
  • Support LAN IP and DHCP Server configuration
  • Support Port Mapping and Loop-Detect
  • Support Firewall function and ACL function
  • Support IGMP Snooping/Proxy multicast feature
  • Support TR069 remote configuration and maintenance
  • Specialized design for system breakdown prevention to maintain stable system
Specifications
Chassis
PON Interface
GPON/EPON (Class B+)
Receiving sensitivity
≦-27dBm
Transmitting optical power
+0.5~+5dBm
Transmission distance:
20KM
Wavelength
TX: 1310nm, RX: 1490nm
Optical Interface
SC/UPC Connector
Chip Spec
CPU 950MHz,DDR2 256 MB
Flash
SPI NAND Flash 128MB
LAN Interface
1 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
Wireless
Compliant with IEEE802.11b/g/n
2.4G Operating frequency:2.400-2.4835GHz
5.8G Operating frequency:5.150-5.825GHz
2.4G 2*2 MIMO, rate up to 300Mbps
5.8G 2*2 MIMO ,rate up to 867Mbps
4 external antennas 5dBi
POTS interface
1 FXS, RJ11 connector
Support: G.711/G.723/G.726/G.729 codec
Support: T.30/T.38/G.711 Fax mode, DTMF Relay
Line testing according to GR-909
LED
12 LED, For Status of PWR、LOS、PON、LAN1~LAN4、2.4G、5.8G、TEL、wps、internet
Operating Temperature / Humidity
0 ~ +50℃ / 10%∼90%(non-condensing)/ Humidity: 10%∼90%(non-condensing)
Power Supply
DC 12V/1A
Dimension
180mm×107mm×28mm(L×W×H)
LGPONU-1RJ45

LGPONU-1RJ45

Lightem LGPONU-1RJ45 is one of the GPON optical network unit design to meet the requirement of the broadband access network. It apply in FTTH/FTTO to provide the data and video service based on the GPON network. It is based on ZTE high-performance xPON access chip. The chip supposes three mode: GPON/EPON/P2P, comply with the GPON standard of g.984, g.983, 802.3-2005, CTC EPON equipment technical requirements, have good xPON interoperability compatibility. It provide one GE auto-adapting Ethernet ports. The LGPONU-1RJ45 features high-performance forwarding capabilities to ensure excellent experience with Internet and HD video services. Therefore, it provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. It has good third-party compatibility to work with the OLT.

Features
  • Comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol
  • Support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate
  • Support bidirectional FEC and RS(255,239) FEC CODEC
  • Support 32 TCONT and 256 GEMPORT
  • Support AES128 decryption function of G.984 standard
  • Support SBA and DBA dynamically broadband allocation
  • Support the PLOAM function of G.984 standard
  • Support Dying-Gasp check and report
  • Support synchronous Ethernet
  • Good interworking with the OLT from different manufacturers, such as HuaWei, ZTE,Cortina etc
  • Down-link LAN ports: 4*10/100/1000M with auto-negotiation
  • Support the rogue ONU alarm function
  • Support VLAN function
  • Operation mode: HGU
  • Support IEEE802.11b/g/n and IEEE802.11ac standard for WIFI
  • Antennas gain: 5DBi with external
  • Support: 300Mbps PHY rate IEEE802.11b/g/n, 866Mbps PHY rate IEEE802.11ac
  • Support multiply SSID
  • Multiple encryption methods:WFA,WPA,WPA2,WAPI
  • Two port for VOIP, support H.248 ,SIP protocol optional

 

Specifications
Chassis
PON Port
1x GPON port, FSAN G.984.2 standard, Class B+
Downstream Data Rate: 2.488Gbps
Upstream Data Rate: 1.244Gbps
SC/PC single mode fiber
28dB Link loss and 30KM distance with 1:128
Ethernet Port (LAN)
1x GE Auto-negotiation RJ45 ports
Full Duplex / Half-Duplex
RJ45, Auto-MDI/MDI-X
Transmission Distance: 100 Meter
Power Supply Port
12V DC input
Shell
Plastic casing
Power
External 12V 0.5A AC/DC power supply adapter
Power consumption: <2W
Dimension
110mm (L) x 70mm( W) x 30mm (H), 0.1kg
Working Temperature
0 ~ 50°C
Storage Temperature
-40 ~ +85°C
Operating Humidity
10% ~ 90% (Non-condensing)
Storage Humidity
5% ~ 95% (Non-condensing)

PON Transreceiver

APPLICATIONS: 

  • Gigabits Access networks
  • FTTH , FTTC , FTTB
  • XGS-PON and GPON Combo access network
© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us