5 Ports Ethernet Switch with 3x10/100M UTP Ports (TX) and 2x Fiber Ports (FX)- LF5-2FX

There are two 100M Fiber Ports and three 10/100M UTP Ports. It is applicable to use in small patterns of Optical Fiber Ethernet as Fiber Repeaters or Ethernet single / multimode fiber converters, and other special requirements of the environment.
Features

  • Optical-Electric Ethernet signals between 10/100M UTP ports (TX) and 100M optical fiber interfaces (FX).
  • Support 3x 10/100M UTP + 2x 10/100 FX (Singlemode or Multimode)
  • UTP port supports MDI / MDI-X auto crossover
  • Broadcast storm protection
  • Supporting max 1916 bytes frame

Specifications
Parameters Values
Optical Port
IEEE802.3u 100Base-TX and 100Base-FX
Connector
UTP: RJ-45,10/100Mbps; Fiber: ST/SC/FC,100Mbps (Full Duplex)
Cable
UTP cable : Cat. 5 (the max distance up to 100m)
Fiber (multimode): 50/125, 62.5/125μm (the max distance up to 2km)
Fiber (singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm (the max distance up to 100km)
Flow control
Full Duplex: IEEE802.3x flow control / Half Duplex: bake pressure flow control
Power
Internal switching power supply: AC170 ~ 260V
Operating Temperature
0°C ~ 50°C
Storage Temperature
-20°C ~ 70°C
Humidity
5% ~ 90%
Dimensions (W x H x D)
180 × 45 × 143mm

Related Products

© 2023 LIGHTEM® Group All rights reserved

Site Map

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us