26 Ports 10/100/1000M Managed Ethernet Switch with 2x RJ45/SFP Combo Ports - LX26-2C

LX26-2C is managed 10/100/1000M gigabit ethernet switch, designed specially for
work groups, internet bars, schools, small and medium enterprises, upgrade the local
area network to gigabit, and meet their demand of high bandwidth. LX26-2C provides 24x
10/100/1000M auto-negotiation RJ45 port, 2x gigabit RJ45/SFP Combo ports, Support
port speed limit, broadcast storm suppression, multicast storm suppression, unknown
unicast storm suppression, 19 inch rack-mountable appearance design.


  • 24x 10/100/1000M auto-negotiation RJ45 ports, 2 gigabit RJ45/SFP Combo ports
  • Support WEB, CLI, SNMP management methods
  • Comply with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z standards, Port-based VLAN port, IEEE 802.1Q VLAN
  • All ports support full duplex 802.3x flow control and half-duplex back pressure Flow Control
  • All ports support half / full duplex mode auto-adaptation
    Using store and forward switch mode
  • Support the MAC address self-learning ,QoS (IEEE 802.1p/1Q) and TOS/DiffServ
  • Support IGMP Snooping, STP/RSTP/MSTP/ERPS, SNMPv1/v2c/v3, RMON, ACL access control list, support 802.1X
  • Support port speed limit, broadcast storm suppression, multicast storm suppression, unknown unicast storm suppression
  • LED indicators light dynamic display the status of equipment and provide a simple troubleshooting
  • 19 inch standard rack-mountable steel case
  • IP40 protection level

Parameters Values
Fixed Port
24 10/100/1000M auto-negotiation RJ45 port
2 1000M RJ45 / SFP Combo ports
Ethernet standard
IEEE802.3-10BaseT, IEEE802.3u-100BaseTX/100Base-FX,IEEE802.3x-Flow Control, IEEE802.3z-1000BaseLX, IEEE802.3ab-1000BaseTX, IEEE802.1ab Logical Link Discovery Protocol, IEEE802.1D-Spanning Tree Protocoll, IEEE802.1w-Rapid Spanning Tree Protocoll, IEEE802.1Q -VLAN Tagging, IEEE802.1p -Class of Service, IEEE802.1X-Port Based Network Access Control, etc
Network Management Type
Layer 2
Backplane Bandwidth
MAC Address
Packet Buffer
Forwarding Rate
LED Indicators
Power indicator: PWR / Interface indicator: electrical port, optical port (Link/ACT)
Protection level:
Input voltage
AC100-240V/DC36-72V(Support built-in overcurrent 4.0A protection, support reverse connection protection)
Power consumption
Dimensions (W x H x D)
442* 325* 44mm
Working Temperature / Humidity
-40 ~80 °C / 5%~90% RH Non-Condensing
Heat Dissipation
Natural cooling, no fan

Related Products

© 2023 LIGHTEM® Group All rights reserved

Site Map

Contact Us