52 Ports Layer 3 Gigabit Ethernet Switch with 6x 1000M combo ports & 4x extensible 10G SFP+ ports - LT52SFP-6C-4ESFP+
Lightem LT52SFP-6C-4ESFP+ is a standard layer 2+ non-blocking switch. Based on modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. It can be deployed in the metropolitan area network, and provides a few last mile technology to gather and core data exchange. At the same time, LT52SFP-6C-4ESFP+ provides a complete IPv4/IPv6 routing, including tunnel and IP multicast. The user can set all kinds of functions of switch through the Web, SNMP and so on. LT52SFP-6C-4ESFP+ support layer 2 and layer 2+ VPN, DOS defense, static routing, RIP, OSPF, BGP, PIM-SM, PIM-DM, DVMRP, NAT, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
Features
- 176G backplane bandwidth
- 42x 1G SFP, 6x RJ45/SFP Combo & 4x 10G SFP+ ports
- Hardware routing, wire-speed 3rd layer switching packet forwarding rate of 130.944Mpps
- DOS, deception and virus defense
- Support IEEE802.1x, provide port-based user authentication, network shield, safety control, and strategy control technology
- Restrict maximum number of connected hosts port, with multi-channel Ethernet interface binding, increasing bandwidth and system redundancy
- Powerful ACL, support for L2-L4 layer data filtering
- Support QinQ
- Strategy control list, flow regulation
- Clustering technology, support more than one device stack, with a unified IP Address to carry on centralized management and address resources savings
- Network management via Web, SNMP
- Redundant power supply, quick failover and quick connection, greatly increasing the reliability of the system
- Support IGMP message detection, effectively limit the spread of broadcast message.
- Support for IGMP message detection, effectively limit the spread of broadcast message.
- IP multicast and QoS
Specifications
| Parameters | Values |
|---|---|
|
Number of SFP optical ports (1G) |
42 |
|
Number of 1G RJ45/SFP Combo ports |
6 |
|
Number of extensible ports (SFP+ 10G) |
4 |
|
Optical port
|
1G SFP & 10G SFP+ |
|
Backplane bandwidth
|
176Gbps
|
|
Packet forwarding rate
|
131Mbps
|
|
The memory capacity
|
128Mb
|
|
Address Table
|
32k |
|
Dimension
|
442mm × 285mm × 44mm |
|
Power supply
|
AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup |
|
Environment humidity / temperature |
0-50 ℃ operation,-40-70 ℃ preservation,0-90% no condensation |
Related Products
© 2024 LIGHTEM® Group All rights reserved
Site Map
All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.
Contact Us
- Tel : +852 - 2687 5815
- Fax: +852 - 2687 5456
- Email: [email protected]
- Office Address: Rm 910-11, 9/F, Topsail Plaza, 11 On Sum Street, Shatin, N.T., H.K.