25 Ports Layer 3 Data Center Switch with 24x 10G SFP+ ports: LT25-24SFP+

Lightem LT25-24SFP+ 10 Gigabit data center switch. It provides 24x 10G SFP+ optical ports, 1x 10/100/1000M RJ45 electrical ports. With high bandwidth and low latency, pipe network. It located in density of the next generation of data center and cloud computing network access, can also be used for large Internet cafes, the core of enterprise network, metropolitan area network, or gathering.


  • 24 10Gb optical ports, the highest density (1U TOR), meet the demand of high-density 10G server access.
  • 480G backplane bandwidth
  • Hardware routing, wire-speed 3rd layer switching packet forwarding rate of 360.092Mpps
  • Able to be managed via Web, SNMP, etc
  • Support XModem protocol, use TFTP/ZMODEM for software upgrading and BootRom upgrading
  • Support SFP+, simultaneously downward compatible XFP
  • Support flexible port configuration
  • Automatically detect and control broadcast storm, support IGMP packets detection, effectively limit the flooding of broadcast packets.
  • Support Ethernet interface taking 1M as the step length for rate limiting
  • Support IEEE802.1x, provide port-based user authentication, network shield, safety control, and policy control technology
  • Restrict the maximum number of hosts connected with the port, multi-binding Ethernet interface , increasing bandwidth and system redundancy

Parameters Values
Fixed Port
24x 10G SFP+ optical ports, 1x 10/100/1000M RJ45 adaptive electrical ports
Console Part
Backplane bandwidth
484 Gbps
Packet forwarding rate
360.092 Mpps
Jumbo frames
12k bytes
Transfer Mode
Support store-forward mode and cut-through mode
IPv4/IPv6 Route
Packet Buffer
4 mb
Flash memory capacity
32 mb
Memory capacity
256 mb
Single-Core 32-bit 600MHz MIPS
Physical Characteristics
440mm × 280mm × 44mm
Power supply
AC 90V ~ 290V
Operating temperature
0-50°C operation
Operating humidity
0-90% no condensation

Related Products

Copyright © 2023 Lightem Systems. All rights reserved