5 Ports Ethernet Switch with 3x10/100M UTP Ports (TX) and 2x Fiber Ports (FX)- LF5-2FX

Lightem LF-5-2FX switch has 3x 10/100M RJ45 and 2x SC Fiber Ports . It is applicable to use in small patterns of Optical Fiber Ethernet as Fiber Repeaters or Ethernet single / multimode fiber converters, and other special requirements of the environment.

Features
  • Optical-Electric Ethernet signals between 10/100M UTP ports (TX) and SC optical fiber interfaces
  • Support 3x 10/100M RJ45 + 2x SC ports (Singlemode or Multimode)
  • UTP port supports MDI / MDI-X auto crossover
Specifications
Parameters Values
Optical Port
3x 10/100M RJ45 + 2x 10/100 SC ports
Forwarding Mode
Support Store and Forward
MAC
1G/8K
Environment temperature
-20 ~ +75°C
Storage temperature
-40 ~ +85°C
Humidity
5% ~ 90% (non condensation)
Wide voltage range
Support 5-24V DC
Reverse power supply
Support network port input 5-24V, DC output 5-24V
Standards and Protocols
IEEE 802.3 Ethernet Media Access Control Protocol ; IEEE 802.3i 10BASE-T Ethernet ;IEEE 802.3u 100BASE-TX Fast Ethernet ; IEEE 802.3x flow control
Data transfer rate
Ethernet 10Mbps half-duplex, 20Mbps full-duplex ; Fast Ethernet 100Mbps half-duplex, 200Mbps full-duplex
Dimensions (W x H x D)
90 × 68 × 28mm
Weight
0.5 kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us