Telecom/Datacom

CWDM

DWDM

Fiber Ethernet Switch

Fiber Amplifier

Fiber Dispersion Control

POE Ethernet Switch / Converter

Fiber Media Convertor

Industrial Switch / Converter

Transceiver Optics

Active Conversion & Multiplexing

GPON

Testing Solutions
Security

Analog Video/Audio/Data Fiber System

Digital Video/Audio/Data Fiber System

Control Data Fiber System

Telephone PABX Fiber System
Audio Video

3G/HD SDI

SDI

Analog Video / Audio

Digital Audio

HDMI / DVI / Display Port

SDI Encoder
CATV RF

CATV Transmitter 1310nm

CATV Transmitter 1550nm

Fiber Amplifier

Receiver FTTX

SAT IF Transmitter & Receiver

Accessories
Search

32 Ports L3 Managed Ethernet Switch with 16x10G RJ45 + 12x 10G SFP+ + 4x 25G SFP28 ports - LT32-12SFP+

Lightem LT32-12SFP+ is a s managed ethernet switch with 16x 10G RJ45, 12x 10G SFP+ and 4x 25G SFP28 ports . It provides high-capacity switching capability, perfect security control strategy and CPU protection strategy (CPU protect policy) to improve fault tolerance, ensure stable operation of the network and load balancing of links, and the device supports automatic DoS attack defense and SNMP, IEEE 802.1, Spanning tree and rapid spanning tree protocols, link aggregation.

Features

16x10G RJ45 + 12x 10G SFP+ + 4x 25G SFP28 ports
760GBackplane Bandwidth
Forwarding rate reaches 565.44Mpps
Ethernet/IEEE802.3 packet size (64 bytes to 1522 bytes)
Jumbo packets up to 9216 bytes
Provide DOS, distributed denial of service, spoofing and virus defense
Support IEEE802.1x, provide port-based user authentication, security control technology and
policy control list
Policy control list, traffic regulation
It can be managed by various methods such as Web and SNMP
Support XModem protocol, can upgrade software and BootRom through TFTP/ZMODEM
Support flow control in full-duplex mode and half-duplex mode
Support the rate limit of the Ethernet interface with a step size of 1M
Automatically detect and suppress broadcast storms, support the detection of IGMP messages, and effectively limit the flooding of broadcast messages
Limit the maximum number of hosts connected to the port, and perform multi-channel binding on the Ethernet interface to increase bandwidth and system
redundancy

Specifications

Parameters	Values
Fixed Port	16x 10G RJ45 , 12x 10G SFP+, 4x 25G SFP28 , 1 OOB management port
Backplane Bandwidth	760Gbps
Packet Forwarding rate	565.44 Mpps
Flash capacity	32MB
Memory Capacity	256M
MAC Address Table	32768
Dimension	440x400x44mm
Power	AC 110-240V self-adaptive, 47-63Hz, support dual AC power supply (selected before leaving the factory)
Indicator Light	<130W
Layer 2 Management Function	yes
Layer 3 Management Function	For IPV4/6

Related Products

4 Ports Ethernet Switch With 2x RJ45 (10/100/1000Mbps) and 2x SFP ports(1000Mbps)- LX4-2SFP

5 Ports Ethernet Switch With 3×10/100M UTP Ports (TX) And 2x Fiber Ports (FX)- LF5-2FX

6 Ports Gigabit Ethernet Switch With 4x 10/100/1000Base UTP Ports And 2x 1000Base- SFPports – LX6-2SFP

10 Ports Ethernet Switch With 8x RJ45 Ports & 2x 1000M SFP Ports – LX7-3SFP

10 ports Gigabit Ethernet Switch with 2x 10/100/1000M RJ45 and 8x GE SFP ports- LX9-8SFP

10 Ports Ethernet Optical Fiber Switch with 8x 10/100M FX and 2x UTP RJ45 10/100/1000M Ports – LF10-8FX

Site Map

Disclaimer

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.