52 Ports 10/100/1000M SMART+ Industrial switch with 48x 1G RJ45 & 4x 1/10G SFP+ - LIROX52-4TG

SMART+ Industrial switch Fiber Switch LIROX52-4TG is a 48x RJ45 port 10/100/1000M , 4x 1/10G SFP+ ports Managed (L3) Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +85°C). These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

Features
  • 48x 10/100/1000M RJ45 ports & 4x 1/10G SFP+ slots, and 1 console port
  • Better manageability, security, QoS, and performance.
  • L3 features IPV4/V6 management, static route
  • L3 Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W). Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)
Specifications
Parameters Values
Number of RJ45 ports (10/100/1000BaseT)
48
Number of 1/10G SFP+ ports
4
Console port
YES (RJ45-RS232)
Transmission Method
Store-And-Forward
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
598 Gbps
Forwarding Rate@64byte
131 Mbps
Buffer Memory
32 mb
MAC Address Table
32k
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter)
Lightning and protection level
Lightning protection: 6KV 8/20us;Protection level: IP40
LED Indicators
Power Indicator : PWR (green); System Indicator :SYS (green);
Network Indicator: Link/ (yellow);SFP Indicator: L/A (green);
Operating Temperature
-40°C+80°C
Storage Temperature
-40°C+85°C
Operating Humidity
5% ~ 95% (no condensation)
Power Supply
Dual AC 100-240V (1+1)
Power Consumption
Standby:<35W;Full load:<60W
Reset switch
Yes,support one key to restore factory settings
Dimensions
440*298*44mm
Weight
5.8kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us