44 Ports 10/100/1000M SMART Industrial switch with 12x 10/100/1000M RJ45(1-8Ports POE), 28x 1G SFP & 4x 10G SFP+ - LIMPOX44-28SFP-4TG

SMART Industrial switch Fiber Switch LIMPOX44-28SFP-4TG is a 8x 10/100/1000M
RJ45(1-8Port PoE), 4×10/100/1000Base-T RJ45 , 28x 1G SFP and 4x 1/10G SFP+ Managed Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +80°C). These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

Features
  • 8x 1G POE RJ45, 4x 1G RJ45 , 28x 1G SFP and 4x 1/10G SFP+ and 1 console port
  • L2+ features provide better manageability, security, QoS, and performance.
  • L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W).
  • Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)
Specifications
Parameters Values
Number of RJ45 ports (10/100/1000BaseT)
12 (1-8 Port PoE RJ45)
Number of 1G SFP ports
28
Number of 1/10G SFP+ ports
4
Console port
yes (RJ45-RS232)
Reset Button
yes
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T ; IEEE802.3z 1000Base-X; IEEE802.3ae 10GBase-SR/LR; IEEE802.3x ; IEEE802.3af/at(PoE Standard)
Ethernet Port Feature
10/100/1000Base-T,Auto-sensing,Full/half duplex MDI/MDI-X, self-adaption
Fiber Port Feature
Gigabit SFP /10G SFP+ fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
598 Gbps
Forwarding Rate@64byte
119.04 Mbps
Buffer Memory
32 mb
MAC Address Table
32k
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter)
Optical Fiber Cable
Multi-mode:850nm 0~300M(10G) ,850nm 0~500M (1.25G); Single-mode:1310nm 0~40KM,1550nm 0~120KM.
PowerConsumption (Max Power Per Port)
Standby<25W; Full Load<130W (30W)
Power Supply
Built-in power supply, AC 100~240V 50-60Hz 2.3A
Power Input Interface
Dual input power interface, AC power supply priority,connection; 2 sets of DC48-57V input interface;
support anti-reverse protection, power-off automatic switching DC ;
connection; 2 sets of DC48-57V input interface; alarm switch ; 1 set of AC power input interface
LED Indicator
Power:PWR(yellow); system:SYS(yellow);network;Link(yellow);PoE:PoE (green);Fiber port:L/A(green)
Heat Dissipation
Low noise; fan active cooling
Operation /Storage TEMP (Humidity)
-40~+80°C / -40~+85°C (5%~90% RH Non condensing)
Dimension (LxWxH)
440*290*44.5mm
Net /Gross Weight
<4.4kg / <5.0kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us