Menu
Menu
Previous
Next
4 Ports 10/100/1000M SMART Industrial POE switch with 2x 1G RJ45 POE & 2x 1G SFP - LIMPOX4-2SFP-x
SMART Industrial POE switch Fiber Switch LIMPOX4-2SFP is a 2x RJ45 port POE (10/100/1000M) and 2x SFP ports (1000M) Managed(L2+) Industrial POE Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +85°C). Its casing is IP40 rated and meet EMC industrial level 4 requirements. These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.
Features
- 2x 10/100/1000M RJ45 POE ports, 2x 1G SFP and 1 console port
- L2+ features provide better manageability, security, QoS, and performance.
- L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
- Support spanning tree STP(802.1D) and RSTP(802.1W). Jumbo frames support up to 9.6K kilobytes.
- Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
- G.8032, ERPS Ethernet Ring Protection Switching (<50ms)
Specifications
| Parameters | Values |
|---|---|
|
Number of RJ45 POE ports (10/100/1000BaseT)
|
2 |
|
Number of 1G SFP ports |
2 |
|
Console port
|
YES (RJ45-RS232)
|
|
Transmission Method
|
Store-And-Forward
|
|
Network Protocols
|
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;
|
|
|
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
|
|
Forwarding Mode
|
Store and Forward (Full Wire Speed)
|
|
Switching Capacity
|
128 Gbps
|
|
Forwarding Rate@64byte
|
5.95 Mbps |
|
Buffer Memory
|
4 mb |
|
MAC Address Table
|
8k |
|
Twisted Pair Transmission
|
10BASE-T: Cat3,4,5 UTP(≤100 meter) ; 100BASE-TX: Cat5e or later UTP(≤100 meter) ;
|
|
|
1000BASE-T: Cat5e or later UTP(≤100 meter)
|
|
Lightning and protection level
|
Lightning protection: 6KV 8/20us;Protection level: IP40
|
|
POE standard |
IEEE802.3af or IEEE802.3at |
|
POE power |
15.4W per POE port (IEEE802.3af);
30W per POE port (IEEE802.3at) |
|
LED Indicators
|
Power Indicator : PWR (green); System Indicator :SYS (green); |
|
|
Network Indicator: Link/ (yellow);SFP Indicator: L/A (green); |
|
Operating Temperature
|
-40°C+80°C |
|
Storage Temperature
|
-40°C+85°C |
|
Operating Humidity
|
5% ～ 95% (no condensation)
|
|
Dimensions |
145x 134.5 x 47.5 mm |
|
Weight |
1 kg |
Related Products
© 2024 LIGHTEM® Group All rights reserved
Site Map
Menu
All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.
Contact Us
- Tel : +852 - 2687 5815
- Fax: +852 - 2687 5456
- Email: [email protected]
- Office Address: Rm 910-11, 9/F, Topsail Plaza, 11 On Sum Street, Shatin, N.T., H.K.