Telecom & Datacom

Transponder

Lightem system provides wide range of transponders – 2R SFP to SFP, 3R to SFP, 10G 1R XFP to XFP, 10G 3R, 40G OEO Converter, 19″ 2U Rack Chassis with 16x slots

transponder

Centralized Management Multi-Service Platform: 2U 16 Slots Chassis - LTSC

Features
  • The LTSC Series is a System Management Card used with our Centralized Network management platform that provides 16 slots multi-service including Managed Media Converter Card, 3R Transponder, 1+1 protection switching card etc.
  • All interface cards, fans, management module Card and AC/DC Redundant Power
  • Supply are hot swappable, allowing online field replacement.
  • Management can be achieved locally or Remote Standalone over the network by
    Web,SNMP, Telnet or Console.

 

Specifications
Parameters Values
Operating temperature
-0 to 50°C
Storage temperature
-10 to 70 °C
Operating humidity
5 ~ 95% non condensation
Power Supply
85VAC~265VAC or -40VDC~-57VDC
Dimensions
Standalone:156mm (W)x128mm(D)× 32mm(H)
2.5G-2R-SFP-to-SFP-Transponder​​

2.5G 2R SFP To SFP Transponder - L2R2GMR

Features
  • Support 2U Rack(16 Slots )and independent use
  • Support network management(Web SNMP, Console),
  • Support in-band management
  • Support ITUT prescribed DWDM/CWDM wavelength
  • Transmission rate:125Mbps~2.5Gbps
  • Support Jumbo Frame
  • Transparent Transport and very low delay
  • Support DMI function for SFP fiber module
  • Support hot plugging
Specifications
Parameters Values
Access Type / Transmission Speed
Fast Ethernet 125Mbps
STS-3/STM-1 155.52Mbps
ESCON/SBCON 200Mbps
STS-12/STM-4 622.08Mbps
1×Fiber Channel 1.0625Gbps
Gigabit Ethernet 1.25Gbps
2×Fiber Channel 2.125Gbps
STS-48/STM-16 2.48832Gbps
2.5 InfiniBand or PCI Express 2.5Gbps

Interface Type

SFP to/from SFP
Transmission Distance
Up to SFP module(Max 80Km)

Local SFP

Support SFP/CWDM/DWDM,Specific optical parameters please refer different modules parameters

Remote SFP

Support SFP/CWDM/DWDM,Specific optical parameters please refer different modules parameters
Power requirement
Rack-mountable : AC 85 ~ 220V OR DC -48V dual-supply,optional
Standalone: AC 220V OR -48V; Power consumption: ≤ 3W
Operating Temperature
0 ~ 50 ℃
Storage Temperature
-10 ~ 70°C

Humidity

5% ~ 90%(non-condensing)

Dimensions

Card: 115mm(W)× 78mm(D)
Standalone: 156mm(W)× 128mm(D)× 32mm(H)
2.5G-2R-SFP-to-SFP-Transponder​​

4.5G 3R SFP to SFP Transponder - L3R4GMR

Features
  • Support 2U Rack(16 Slots )and independent use
  • Support network management(Web SNMP, Console),
  • Support in-band management
  • Support ITUT prescribed DWDM/CWDM wavelength
  • Transmission rate:125Mbps~4.25Gbps
  • 3R function.
  • Support Jumbo Frame
  • Transparent Transport and very low delay
  • Support DMI function for SFP fiber module
  • Support Loopback test function
  • Support PRBS Generator and checker
  • Support hot plugging
Specifications
Parameters Values
Equipment function
3R Repeater
Access Type / Transmission Speed
Fast Ethernet 125Mbps
STS-3/STM-1 155.52Mbps
ESCON/SBCON 200Mbps
STS-12/STM-4 622.08Mbps
1×Fiber Channel 1.0625Gbps
Gigabit Ethernet 1.25Gbps
2×Fiber Channel 2.125Gbps
STS-48/STM-16 2.48832Gbps
2.5 InfiniBand or PCI Express 2.5Gbps
4×Fiber Channel 4.25Gbps
Interface Type
SFP to/from SFP
Transmission Distance
Up to SFP module(Max 80Km)
Local SFP
Support SFP/CWDM/DWDM,Specific optical parameters please refer different modules parameters
Remote SFP
Support SFP/CWDM/DWDM,Specific optical parameters please refer different modules parameters
Power requirement
Rack-mountable : AC 85 ~ 220V OR DC -48V dual-supply,optional
Standalone: AC 220V OR -48V; Power consumption: ≤ 3W
Operating Temperature
0 ~ 50 ℃
Storage Temperature
-10 ~ 70°C
Humidity
5% ~ 90%(non-condensing)
Dimensions
Card: 115mm(W)× 78mm(D)
Standalone: 156mm(W)× 128mm(D)× 32mm(H)
4.5G-3R-SFP-to-SFP-Transponder​

10G 1R XFP to XFP Transponder - L1R10GMR

Features
  • Support Jumbo Frame
  • Transparent Transport and very low delay
  • Support ITUT prescribed DWDM/CWDM wavelength
  • Support hot plugging
  • Support 2U Rack (16 channel) and standalone use
  • Support hot plugging
Specifications
Parameters Values
Transmission Speed
9.95Gb/s-11.35Gb/s
Protocols
SONET OC-192, SDH STM-64 (9.95Gbps)
10G WAN (10Gbps)
10G LAN (10.31Gbps)
OTN OTU-2 (G.709) (10.70Gbps)
10G LAN with 255/237 FEC coding (11.09Gbps)
10G Fiber Channel (11.32Gbps)
10G POS
Interface Type
XFP to XFP
Transmission Distance
XFP module: Up to 80Km
Maximum Packet / Forwarding Rate
14,880,950/S
Remote SFP
Support SFP/CWDM/DWDM,Specific optical parameters please refer different modules parameters
Power requirement
Rack-mountable : AC 85 ~ 220V OR DC -48V
Standalone: AC 220V OR -48V; Power consumption: ≤ 4W
Operating Temperature
0 ~ 50 ℃
Storage Temperature
-10 ~ 70°C
Humidity
5% ~ 90%(non-condensing)
Dimensions
Card: 115mm(W)× 78mm(D)
Standalone: 156mm(W)× 128mm(D)× 32mm(H)
4.5G-3R-SFP-to-SFP-Transponder​

10G 3R Transponder - L3R10GMR

Features
  • Available in SFP+ to SFP+ , SFP+ to RJ45 , SFP+ to XFP and XFP to XFP
  • Support 2U Rack(16 Slots) and independent use
  • Support network management (Web SNMP, Console)
  • Support Loopback
  • Support in-band management
  • Support ITUT prescribed DWDM/CWDM wavelength
  • 3R regeneration
  • Support Jumbo Frame
  • Protocol transparent with minimal delay
  • Support DDMI for SFP+/XFP module
  • Support Loopback test function
  • Support PRBS Generator and checker
  • Support hot plugging
    Full State Led display
Specifications
Parameters Values
Equipment function
3R Repeater
Transmission Speed
10Gb/s ( 9.95Gb/s-11.35Gb/s )
Protocols
IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM)
Access Type
10G LAN/ 10G WAN
Interface Type
Type A: SFP+ To/From SFP+
Type B: SFP+ To/From RJ45
Type C: XFP To/From XFP
Type D: XFP To/From SFP+
Network management information:

•  Card type information
•  SFP+ or XFP fiber module detection
•  SFP+ or XFP fiber module DMI function(Temperature, Voltage, Optical power)
•  Link status detector
•  Enable/Disabled Loopback test function
•  Enable/Disable PRBS Generator and checker function
•  Rate select(10Gbase-Lan or Wan)
•  Remote card's status monitor(only in pairs)

Maximum Packet / Forwarding Rate
14,880,950/S
Remote SFP
Support SFP/CWDM/DWDM,Specific optical parameters please refer different modules parameters
Power requirement
Rack-mountable : AC 85 ~ 220V OR DC -48V
Standalone: AC 220V OR -48V; Power consumption: ≤ 6W
Operating Temperature
0 ~ 50 ℃
Storage Temperature
-10 ~ 70°C
Humidity
5% ~ 90%(non-condensing)
Dimensions
Card: 115mm(W)× 78mm(D)
Standalone: 156mm(W)× 128mm(D)× 32mm(H)

40G OEO Converter (3R Repeater) - L3R40GMR

Features
  • Supporting QSFP to QSFP
  • Supporting1*40G Mode and 4*10G Mode
  • Supporting Loopback test, precisely locating the failure, convenient for link test
  • 3R function, stable data transmission
  • Short delay time when transparent transmission
  • Supporting Jumbo frame
  • Supporting DMI(Diagnostic Monitoring Interface) function of optical transceivers
  • With powerful network management function, supporting WEB and SNMP
  • Supporting hot plug
Specifications
Parameters Values
Interface Type
QSFP to QSFP
Power Dissipation
<8W
Operating Temperature
0 ~ 50°C
Storage temperature
-40°C∼70°C
Relative humidity
5%∼90%
Dimension
112.8mm (W)×77.2mm(D)×23 mm(H) (Card)
L3R40GMR-x

2x100G QSFP28 Transponder Card - L3R100G-QSFP28

Features
  • Protocol Transparent Transponder
  • Support Multi-rate: 100GE, 40G, OTU4
  • Layer 1
  • Low latency
  • Support forward and loopback
  • Pay-as-you-grow architecture based on pluggable module
  • Comprehensive line and service performance monitoring
  • Easy maintenance with field-replaceable parts
  • Support CLI, Telnet, SNMP GUI NMS Danriver iCEO B/S
  • Managed service platform LR1U-100G
  • Modular and cost-effective for future growth and maintenance access
Specifications
Parameters Values
Transmission Rate and standard
100GbE: IEEE 802.3ba / OTU4: OTU4 / 40GbE IEEE 802.3ba / Other Data Rate On Request
Client Interface
Density
1
Protocol
100GbE,OTU4,40GbE
Optical interface
Hot pluggable QSFP28/QSFP+ module
Wavelength
850nm/1310nm/CWDM
Optical Reach
100G QSFP28 SR4/LR4/CWDM4/ER4 Lite/ER4 40G QSFP+ SR4/LR4
Environment
Operating Temperature
-5°C to 50°C
Storage Temperature
-20°C to 85°C
Humidity
5% ~ 85% RH non-condensing
Power Supply
Power Input
DC -48V input from backplane
Power Consumption
< 15W
Dimensions(HxWxD mm)
20x192x223
Weight (kg)
0.35

19" 1U Rackmount Chassis - LR1U-100G

Features
  • Carrier Class Features
  • Layer 1
  • Multi-rate Transponders
  • Muxponders for Wavelength Utilization
  • Scale up to 80 wavelengths
  • Amplifications over Long Distance
  • Performance Monitoring
  • Support Single or Dual Fiber
  • Low Latency Connectivity
  • Hot Swappable Board Cards
  • Multiple Protection Methods
  • Hot Redundancy Power Supply and FAN
  • Easy maintenance with fieldreplaceable parts
  • Remote Management with in-band or out-band Optical Supervisory Channel
  • EMS Management Platform
Specifications
Parameters Values
Universal Slots
4
Management Card
SCC
Cooling System
Fan cooling, Left and right ventilation
Rack Unit
1 RU
Dimension(HxWxD)
44 x442 x440 mm
Weight (kg, No Service Card)
5.5
Wavelength(MAX.)
DWDM: 80 channels / CWDM:8 channels
Maximum Rate per wavelength
100G/200G
Rack mount
19” Rack,ETSI 600
Power Consumption(Full load)
200W
Operating Temperature
-5 ~ 50°C
Storage Temperature
-20 ~ 85°C
Humidity
10~90% non condensing

19" 2U Rack Chassis with 16x slots - LR2U-3RC

Features
  • Support 1/2/3R Transponder series
  • Optional system management function
  • Optional cascading card to manage up to total 4x Rack Chassis
  • Support console, Web, Telnet and SNMP
Specifications
Parameters Values
Support slots
Max 16
System Management
Optional system management card
Management protocol
Console; Web; Telnet; SNMP
Scalability
Optional cascade card Max 4x 19” Rack chassis be managed via one IP
Management features
Network device auto-sensing and adding
Display name, IP, time, operation conditions etc
Display related SFP/XFP DDMI information
Alarming and operating log
LR2U-3RC
© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us