24 Ports 10/100/1000M SMART+ Industrial POE switch with 12x 1G RJ45 (1-8port POE), 8x 1G SFP & 4x 1/10G SFP+ - LIRPOX24-8SFP-4TG

SMART+ Industrial switch Fiber Switch LIRPOX24-8SFP-4TG is a 12x RJ45 port 10/100/1000M (1-8 port POE), 8x 1G SFP, 4x 1/10G SFP+ ports Managed (L3) Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +85°C). Its casing is IP40 rated and meet EMC industrial level 4 requirements. These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

Features
  • 12x 10/100/1000M RJ45 ports (1-8port POE), 8x 1G SFP, 4x 1/10G SFP+ slots, and 1 console port
  • Better manageability, security, QoS, and performance.
  • L3 features IPV4/V6 management, static route, POE management
  • L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W). Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)

 

Specifications
Parameters Values
Number of RJ45 ports (10/100/1000BaseT)
20
Number of RJ45 POE ports (10/100/1000BaseT)
8
Number of 1/10G SFP+ ports
4
Console port
YES (RJ45-RS232)
Transmission Method
Store-And-Forward
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
598 Gbps
Forwarding Rate@64byte
89.28 Mbps
Buffer Memory
32 mb
MAC Address Table
32k
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter)
Lightning and protection level
Lightning protection: 6KV 8/20us;Protection level: IP40
POE standard
IEEE802.3af or IEEE802.3at
POE power
15.4W per POE port (IEEE802.3af); 30W per POE port (IEEE802.3at)
LED Indicators
Power Indicator : PWR (green); System Indicator :SYS (green);
Network Indicator: Link/ (yellow);SFP Indicator: L/A (green);
Operating Temperature
-40°C+80°C
Storage Temperature
-40°C+85°C
Operating Humidity
5% ~ 90% (no condensation)
Power Supply
DC 48-57V
Reset switch
Yes,support one key to restore factory settings
Dimensions
166*149*89mm
Weight
2.2kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us