Menu
Menu
Previous
Next
2 Ports 10/100/1000M Industrial POE Switch with 1x POE RJ45 ports and 1x SFP - LIPOX2-1SFP
LIPOX2-1SFP is a 1x 10/100/1000M POE RJ45 port and 1x SFP port Industrial POE switch. Its casing is IP40 rated and meet EMC industrial level 4 requirements. Features 6KV network port surge protection which is important for harsh outdoor environment and ensure the reliability of the uninterrupted system.
Features
- 1 Port 10/100/1000M RJ45 with Auto Uplink™ , 1 port 100M SFP
- IEEE802.3AF (15.4W per port) or IEEE802.3AT (25.5W per port)
- Harsh industrial environment or higher requirement
- -40°C ~ +85°C operating temperature range
- Link Fault Pass-through (LFP)
- Automatic MAC address learning and aging
- Support IGMP (Multicasting)
- 10/100/1000MMbps Auto-negotiation , auto-MDI-MDI-X LED indicators for monitoring power/link/activity
- Supports 10/100/1000Mbps-Full/Half-duplex
- Supports Wall-mount and DIN-Rail installation for lightning protection
- Supports Daisy-Chain connection & Broadcast Storm Control
- Supports Relay output for power failure
- Super lightening protection, IP40 protection
- Excellent heat elimination without cooling fan
- Redundant dual DC power inputs
Specifications
| Parameters | Values | |
|---|---|---|
|
Interface |
1 x 10/100/1000Base-T RJ45 port + 1x 100Mbps SFP |
|
|
POE power |
15.4W per POE port (IEEE802.3af);
30W per POE port (IEEE802.3at) |
|
|
Network Protocols |
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX; |
|
|
|
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
|
|
|
Network Media |
10BASE-T: Cat3,4,5 UTP(≤100 meter);
10BASE-T: Cat3,4,5 UTP(≤100 meter) |
|
|
|
100BASE-TX: Cat5 or later UTP(≤100 meter) |
|
|
|
1000BASE-TX: Cat6 or later UTP(≤100 meter)
|
|
|
Bandwidth |
1Gbps
|
|
|
Packet Buffer Memory
|
512k
|
|
|
Packet Forwarding Rate |
7.44Mpps/port |
|
|
MAC Address Table |
1k
|
|
|
Forwarding Mode
|
Store-and-Forward |
|
|
Protection |
6KV Lightning protection, IP40 protection |
|
|
LED Indicators
|
Power: PWR; Link; PoE; Link/Act
|
|
|
|
Input Voltage: DC52V (48¬57V) /Terminal block
|
|
|
Power Consumption |
Standby:<4W; Full load:<18W |
|
|
Working temperature |
-40°C+ ~ 85°C |
|
|
Storage temperature |
-40°C+ ~ 85°C |
|
|
Relative Humidity |
5%~95 %(no condensation) |
|
|
Installation
|
DIN-Rail or Wall mounting |
|
|
Dimension
|
119 x 100 x 30 mm |
|
|
Weight |
0.5kg |
|
