16Ports 10/100/1000M SMART Industrial UPOE Switch With 8x 10/100/1000M RJ45 @UPOE 60W & 8x 1000M SFP - LIMPOX16-8PU-8SFP

LIMPOX16-8PU-8SFP is a 8x 10/100/1000M UPOE RJ45 port and 8x 1000M SFP port SMART Industrial UPOE switch. Its casing is IP40 rated and meet EMC industrial level 4 requirements. Features 3KV network port surge protection which is important for harsh outdoor environment and ensure the reliability of the uninterrupted system.


  • 8x 10/100/1000M UPOE RJ45@70W + 8x 1000M SFP
  • Supports IEEE 802.3bt (Max 95W / single port)
  • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
  • IP40 protection
  • Support Din Rail Mount
  • RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX
  • MAC address table of the UPOE Switch with auto-learning and auto-aging
  • Supports full-duplex and half-duplex auto-negotiation
  • LED indicators for monitoring power, link, activity and UPOE status

Parameters Values
Number of UPOE RJ45 ports (10/100/1000BaseT)
Number of 1000M SFP ports
Console port
YES (RJ45-RS232)
Network Management Type
Network Protocol and Standards
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
Forwarding Mode
Store and Forward(Full Wire Speed)
Switching Capacity
Forwarding Rate @ 64byte
Buffer Memory
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ; 100BASE-TX: Cat5e or later UTP(≤100 meter) ; 1000BASE-T: Cat5e or later UTP(≤100 meter)
Lightening and protection level
Lightening protection: 6KV 8/20us;Protection level: IP40
Operating temperature
-40 to 80°C
Storage temperature
-40 to 85 °C
Operating humidity
5 ~ 95% non condensation
Power Supply
DC 48-57V
Power Consumption
Standby<8W, Full load<120W
Power Indicator : PWR (green); System Indicator :SYS (green); Network Indicator: Link/ (yellow);SFP Indicator: L/A (green);
Reset switch
Yes,support one key to restore factory settings.

Related Products

© 2023 LIGHTEM® Group All rights reserved

Site Map


All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us