12 Ports 10/100/1000M SMART Industrial POE switch with 10x 1G RJ45 (1-8port POE) & 2x 1G SFP - LIMPOX12-2SFP-x

SMART Industrial POE switch Fiber Switch LIMPOX12-2SFP is a 10x RJ45 port (10/100/1000M, 1-8 ports POE) and 2x 1G SFP  ports.  Managed Industrial POE Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +85°C). Its casing is IP40 rated and meet EMC industrial level 4 requirements. These switches are especially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.
Features
  • 10x RJ45port (10/100/1000M, 1-8ports POE), 2x 1G SFP and 1 console port
  • L2+ features provide better manageability, security, QoS, and performance.
  • L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W). Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)

 

Specifications
Parameters Values
Number of RJ45 POE ports (10/100/1000BaseT)
Total 10 ports, 1-8ports POE
Number of 1G SFP ports
2
Console port
YES (RJ45-RS232)
Transmission Method
Store-And-Forward
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
192 Gbps
Forwarding Rate@64byte
17.9 Mbps
Buffer Memory
4 mb
MAC Address Table
8k
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter)
Lightning and protection level
Lightning protection: 6KV 8/20us;Protection level: IP40
POE standard
IEEE802.3af or IEEE802.3at
POE power
15.4W per POE port (IEEE802.3af); 30W per POE port (IEEE802.3at)
LED Indicators
Power Indicator : PWR (green); System Indicator :SYS (green);
Network Indicator: Link/ (yellow);SFP Indicator: L/A (green);
Operating Temperature
-40°C+80°C
Storage Temperature
-40°C+85°C
Operating Humidity
5% ~ 90% (no condensation)
Power Supply
DC 48-57V
Power Consumption
Standby<8W, Full load<120W
Reset switch
Yes,support one key to restore factory settings
Dimensions
165x 148x 54mm
Weight
1kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us