Menu
Menu
Previous
Next
36 Ports 10/100/1000M SMART Industrial switch with 8x 10/100/1000M RJ45, 24x 1G SFP & 4x 10G SFP+: LIMOX36-24SFP-4TG
SMART Industrial switch Fiber Switch LIMOX36-24SFP-4TG is a 8x 10/100/1000M RJ45, 24x 1G SFP& 4x 10G SFP+ Managed Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +75C). These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.
Features
- 8x 10/100/1000M RJ45 ports, 24x 1G SFP, 4x 10G SFP+ and 1 console port
- L2+ features provide better manageability, security, QoS, and performance.
- L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
- Support spanning tree STP(802.1D) and RSTP(802.1W).
- Jumbo frames support up to 9.6K kilobytes.
- Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
- G.8032, ERPS Ethernet Ring Protection Switching (<50ms)
Specifications
| Parameters | Values |
|---|---|
|
Number of RJ45 ports (10/100/1000BaseT) |
8 |
|
Number of 1G SFP ports |
24 |
|
Number of 10G SFP+ ports |
4 |
|
Console port |
YES (RJ45-RS232) |
|
Transmission Method
|
Store-And-Forward
|
|
Network Protocol and Standards
|
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T;
IEEE802.3z 1000Base-X; IEEE802.3x |
|
Forwarding Mode |
Store and Forward(Full Wire Speed)
|
|
Switching Capacity |
598Gbps |
|
Forwarding Rate @ 64byte |
107Mpps |
|
MAC |
32K |
|
Buffer Memory
|
32M
|
|
Twisted Pair Transmission
|
10BASE-T: Cat3,4,5 UTP(≤100 meter) ; 100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter) |
|
Lightening and protection level |
Lightening protection: 6KV 8/20us;Protection level: IP40 |
|
Operating temperature |
-40 to 80°C |
|
Storage temperature |
-40 to 85 °C |
|
Operating humidity |
5 ~ 95% non condensation |
|
Power Supply |
AC220V |
|
Power Consumption |
Standby<35W, Full Load<50W |
|
LED |
Power Indicator : PWR (green); System Indicator :SYS (green); Network Indicator:
Link/ (yellow);SFP Indicator: L/A (green); |
|
Reset switch |
Yes,support one key to restore factory settings. |
|
Dimensions |
440x298x44mm
|
|
Weight |
3.5kg |
Related Products
© 2024 LIGHTEM® Group All rights reserved
Site Map
Menu
All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.
Contact Us
- Tel : +852 - 2687 5815
- Fax: +852 - 2687 5456
- Email: [email protected]
- Office Address: Rm 910-11, 9/F, Topsail Plaza, 11 On Sum Street, Shatin, N.T., H.K.