18 Ports 10/100/1000M SMART Industrial switch with 16x 1G RJ45 & 2x 1G SFP - LIMOX18-2SFP

SMART Industrial switch Fiber Switch LIMOX18-2SFP is a 16x RJ45port (10/100/1000M), 2x SFP ports (1000M) Managed Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +85degreeC). Its casing is IP40 rated and meet EMC industrial level 4 requirements. These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

Features
  • 16x 10/100/1000M RJ45 ports, 2x 1G SFP slots, and 1 console port
  • 1Ch Dry Contact Alarm output
  • L2+ features provide better manageability, security, QoS, and performance.
  • L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W). Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)
Specifications
Parameters Values
Number of RJ45 ports (10/100/1000BaseT)
16
Number of 1G SFP ports
2
Console port
YES (RJ45-RS232)
Ethernet Port
Port 1-16 support 10/100/1000Base-T(X),Auto-sensing,Full/half duplex MDI/MDI-X self-adaptio
SFP Slot Port
Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC
Optical Cable
Multi mode: 850nm 0 ~ 550M,single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM.
Network Management Type
L2+
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
256 Gbps
Forwarding Rate@64byte
26.78 Mbps
Buffer Memory
6M
MAC Address Table
8k
Jumbo Frame
9.6K
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
Content
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter)
Lightning and protection level
Lightning protection: 6KV 8/20us;Protection level: IP40
LED Indicators
Power Indicator : PWR (green); System Indicator :SYS (green);
Network Indicator: Link/ (yellow);SFP Indicator: L/A (green);
Operating Temperature
-40°C+80°C
Storage Temperature
-40°C+85°C
Operating Humidity
5% ~ 95% (no condensation)
Power Supply
Built-in power supply, AC100~240V 50-60Hz 0.56A
Power Consumption
Standby:<16W;Full load:<30W
Reset switch
Yes,support one key to restore factory settings
Dimensions
440*298*44mm
Weight
<4.7kg / <5.4kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us