6 Ports 10/100/1000M SMART Industrial switch with 4x 1G RJ45 & 2x 1G GE Combo - LIMOX6-2C

SMART Industrial switch Fiber Switch LIMOX6-2C is a 4x RJ45 port (10/100/1000M), 2x 1G RJ45/SFP Combo Managed Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +75°C). These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

Features

  • 4x 1G RJ45 & 2x GE combo port
  • L2 features provide better manageability, security, QoS, and performance.
  • L2 Switching features including 802.1x authentication, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard
  • Support spanning tree STP(802.1D) and RSTP(802.1W).
  • Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)

Specifications
Parameters Values
Number of RJ45 ports (10/100/1000BaseT)
4
Number of GE SFP ports
2
2 set of V+, V- redundant DC power interface (5P Phoenix terminal)
Ethernet Port
Port 1-4 support 10/100Base-TX, Port 5-6 support 10/100/1000Base-T(X) automatic detection, full / half duplex MDI/MDI-X adaptive; Gigabit SFP optical fiber interface
Reset Switch
Yes, Press and hold the reset switch for 10s and release it to restore the factory settings
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
64 Gbps
Forwarding [email protected]
3.57 Mpps
Buffer Memory
4 mb
MAC Address Table
16k
Jumbo Frame
10 K
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
Content
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter)
Lightning and protection level
Lightning protection: 6KV 8/20us;Protection level: IP40
LED Indicators
Power Indicator : PWR (green); System Indicator :SYS (green);
Network Indicator: Link/ (yellow);SFP Indicator: L/A (green);
Operating Temperature
-40°C+80°C
Storage Temperature
-40°C+85°C
Operating Humidity
5% ~ 95% (no condensation)
Power Supply
DC 12-48V
Power Consumption
Standby<5W, Full load<8W
Dimensions
145*134.5*47.5mm
Weight
0.8kg

Related Products

© 2023 LIGHTEM® Group All rights reserved

Site Map

Contact Us