Menu
Menu
Previous
Next
24 Ports 10/100/1000M SMART Industrial switch with 20x 1G RJ45 & 4x 1/10G SFP+ - LIMOX24-4TG
SMART Industrial switch Fiber Switch LIMOX24-4TG is a 20x 10/100/1000M RJ45 port and 4x 1/10G SFP+ ports. Managed Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +80°C). Its casing is IP40 rated and meet EMC industrial level 4 requirements. These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.
Features
- 20x RJ45port , 4x 1/10G SFP+ and 1 console port
- L2+ features provide better manageability, security, QoS, and performance.
- L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
- Support spanning tree STP(802.1D) and RSTP(802.1W). Jumbo frames support up to 9.6K kilobytes.
- Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
- G.8032, ERPS Ethernet Ring Protection Switching (<50ms)
Specifications
| Parameters | Values |
|---|---|
|
Number of RJ45 ports (10/100/1000BaseT)
|
20 |
|
Number of 1/10G SFP+ ports
|
4 |
|
Console port
|
YES (RJ45-RS232)
|
|
Network Management Type |
L2+ |
|
Transmission Method
|
Store-And-Forward
|
|
Network Protocols
|
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;
|
|
|
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
|
|
Forwarding Mode
|
Store and Forward (Full Wire Speed)
|
|
Switching Capacity
|
598 Gbps
|
|
Forwarding Rate@64byte
|
89.3 Mbps |
|
Buffer Memory
|
32 mb |
|
MAC Address Table
|
32k |
|
Twisted Pair Transmission
|
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
|
|
|
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
|
|
|
1000BASE-T: Cat5e or later UTP(≤100 meter)
|
|
Lightning and protection level
|
Lightning protection: 6KV 8/20us;Protection level: IP40
|
|
POE standard |
IEEE802.3af or IEEE802.3at |
|
POE power |
15.4W per POE port (IEEE802.3af); 30W per POE port (IEEE802.3at) |
|
LED Indicators
|
Power Indicator : PWR (green); System Indicator :SYS (green); |
|
|
Network Indicator: Link/ (yellow);SFP Indicator: L/A (green); |
|
Operating Temperature
|
-40°C+80°C |
|
Storage Temperature
|
-40°C+85°C |
|
Operating Humidity
|
5% ～ 90% (no condensation)
|
|
Power Supply
|
DC 48-57V
|
|
Power Consumption |
Standby<18W, Full load<120W |
|
Reset switch
|
Yes,support one key to restore factory settings
|
|
Dimensions |
166x 150x 68.5mm |
|
Weight |
2kg |
