Telecom/Datacom

CWDM

DWDM

Fiber Ethernet Switch

Fiber Amplifier

Fiber Dispersion Control

POE Ethernet Switch / Converter

Fiber Media Convertor

Industrial Switch / Converter

Transceiver Optics

Active Conversion & Multiplexing

GPON

Testing Solutions
Security

Analog Video/Audio/Data Fiber System

Digital Video/Audio/Data Fiber System

Control Data Fiber System

Telephone PABX Fiber System
Audio Video

3G/HD SDI

SDI

Analog Video / Audio

Digital Audio

HDMI / DVI / Display Port

SDI Encoder
CATV RF

CATV Transmitter 1310nm

CATV Transmitter 1550nm

Fiber Amplifier

Receiver FTTX

SAT IF Transmitter & Receiver

Accessories
Search

RS232/485 to LoRa converter - LST24-LORA

LST24-LORA is a serial RS232/485 to LoRa converter, which supports point-to-point protocol and fixed-point transmitting mode

Features

Point to Point LoRa Modems
Supports point-to-point protocol and fixed-point transmitting mode
Long communication distance, anti-interference, peer to peer
Support hardware watchdog
Anti-interference High receiving sensitivity: Receiving sensitivity can reach -138.5dBm

Specifications

Parameters	Values
Frequency band	L:398-525MHz, H:803-930MHz
Transmitting power	10dBm~20dBm
Receiving sensitivity	[email protected]
Transmission distance	3500 meters. Test condition: Open area, clear weather, 20dBm transmitting power, 5dBi antenna gain, height is greater than 2 meters, 0.268K air rate.
Antenna	SMA
Data interface	Serial port: Support RS232/RS485 // Baud rate: 1200bps~115200bps
Working voltage	5V~36V ( Transmitting current: 45mA@12V. )
Working current	Standby mode: 12mA@12V.
Working temperature	-30℃~+80℃
Working humidity	10~90%RH
Size	103x 86 x 25 mm

Related Products

Industrial PROFIBUS to Fiber Converters – LPBxxx-1yy

Lightem Fiber Tap – LFP

LFR series RS232/485 Serial Optic Fiber Redundant Ring Converter – LFRMRS24

4G Industrial Dual SIM Single Standby LTE Terminals – LSLTE-ES

Lightem 5G SA/NSA Industrial Router – LS5GLTE-4E-W

Lightem LSLTE-WR Industrial WiFi Wireless 4G LTE Router – LSLTE-WR

Site Map

Disclaimer

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.