2Ch-RS232422485-to-TCPIP-Converter

L2ST244 Series 2 port RS232/485/422 to TCP/IP Converter

LST244 is a industrial grade serial RS232/422/458 to TCP/IP converter, which enables serial device to be connected in TCP/IP network. With its software the device can be found easily in the network. Configuration can be easily done via web management.

Features
  • 2Ch RS232/422/485 serial to TCP/IP conversion
  • 1x 10/100 RJ45 port
  • Support full duplex low cost reliable servers
  • Support TCP server / clients, UDP mode
  • Built in web server, easy configuration via web browser
  • Support Baud from 1200-460800
  • Support virtual port, web management or Vircom configurations
  • 2kV surge protection on RJ45 ports
  • Optional power supply by POE

 

Specifications
Parameters Values
Ethernet port
2x 10/100Mbps RJ45
Surge protection
2KV electromagnetic isolation
Serial interface
RS232/422/485
No. of port
2x 2PIN terminal for RS485, 2x RJ45 for RS232/422
Parity bits
None, even, odd, space, mark
Data bits
5~9
Stop parity bit
1, 2
Flow control
RTS/CTS, DTR/DCR, Xon/Xoff
Data rate
1200bps~460800bps
Protocol
TCP, HTTP, UDP, ICMP, ARP, IP, DNS, DHCP
Virtual serial platform
Window 98/2000/XP/Win7/Win8
Configuration
Web, Vircom, serial type AT command
Power supply
DC9~24V, 400mA
Dimension
94 x 65 x 25mm
Working temperature
-45 ~ +85°C
Storage temperature
-45 ~ +85°C
Humidity
5 ~ 95% RH

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us