LxCAN-yF CAN Bus Fiber converter

Fiber-CAN converter

The LxCAN-y converter has integrated two standard CAN-Bus interface, one fiber interface(Single mode, multi mode, SC, ST). LxCAN-y converter can build a connection between Fiber Bus and CAN-Bus. With this converter in pairs, users can easily extend the distance of CAN-Bus and eliminate the interference effectively. It can also prevent the bus from electromagnetic interference, ground loop interference and lightning strike.

  • Power supply: 9~30V(50mA, 24V DC)
  • Surge immunity level: ±1KV
  • Working temperature range from -40 to 85°C
  • Operating humidity range: 5% to 95% RH no condensation
  • Integrated 2 CAN-Bus interface with terminal
  • CAN-Bus signals include: CAN_H, CAN_L, CAN_GND
  • CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898 standards
  • CAN-Bus baud rates range from 5Kbps to 1Mbps, configured by DIP switch
  • CAN-Bus isolation converter insulation voltage: DC 1500V
  • Fiber interface: SC, ST optional
  • Fiber transmission mode: single mode, multi mode optional
    Size: (L)121mm * (W)93mm * (H)22mm


SC, ST optional
OPEN3 terminal blocks
Fiber transmission mode
Single mode, multi mode optional
CAN interface
ISO 11898 standard, CAN2.0A/B
CAN baud rate
5Kbit/s~1Mbit/s, configured by DIP switch
Electrical isolation
1500V, DC-DC
CAN termination resistor
Integrated, through the DIP switch to enable
Power supply voltage
+9~30V DC
Power supply current
Maximum 50mA (24V DC)
Working temperature
-40 degree C ~ +85 degree C
Working humidity
15%~90%RH, no condensation
EMC test
EN 55024:2011-09 EN 55022:2011-12
Protection grade
IP 20
Outline size
121mm *93mm *22mm

Related Products

© 2023 LIGHTEM® Group All rights reserved

Site Map

Contact Us