16 Ports 10/100/1000M Industrial Fiber POE Switch with 8x RJ45 and 8x 1G SFP - LIMPOX16-8SFP

LIMPOX16-8SFP is a 8x 10/100/1000M POE RJ45 and 8x 1G SFP ports Industrial POE switch. It has L2+ network management function to support IPV4/ IPV6 management. Its protection leve is IP40 and meet EMC industrial level 4 requirements. Features 6KV lightning protection which is important for harsh outdoor environment and ensure the reliability of the uninterrupted system

Features
  • 8x 10/100/1000M RJ45 POE and 8x 1G SFP
  • L2+ Network Management Type
  • Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
  • Comply with IEEE 802.3 af/at PoE standard, automatically identify PoE devices for power supply and not damage non-PoE devices
  • Support IP+MAC+port+VLAN quadruple exible combination binding function
  • Standard IU rack mount/Desktop design
  • CPU monitoring, memory monitoring, Ping detection, and cable detection
  • Support ERPS ring network and STP/ RSTP/ MSTP to eliminate layer 2 loops and realize link backup
Specifications
Parameters Values
Number of POE port (10/100/1000BaseT)
8
Number of SFP port (100/1000Base-X)
8
Console port
1*RS23 Console port (115200,N,8,1)
5 Pin Phoenix terminal
2 set of V+, V- redundant DC power interface
Ethernet Port
Port 1-8 support 10/100/1000Base-T auto-sensing, full/ half duplex MDI/ MDI-X self-adaption
Network Management Type
L2+
Network Protocol and Standards
IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-TX, IEEE802.3z 1000Base-X, IEEE802.3x
Forwarding Mode
Store and Forward(Full Wire Speed)
Switching Capacity
52Gbps (non-blocking)
Forwarding Rate @ 64byte
23.8Mpps
MAC
8K
Buffer Memory
6M
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP (≤100 meters);100BASE-TX: Cat5 or later UTP (≤100 meters); 1000BASE-T: Cat5e or later UTP (≤100 meters)
Lightening and protection level
Protection level: IP40 ; Lightning protection: 6KV 8/20us
Operating temperature / Humidity
-40 ~ 80°C, 5%~90% RH Non condensing
Storage temperature/ Humidity
-40 ~ 85°C, 5%~90% RH Non condensing
Power Supply
No, optional 48V/60W or 48V/120W industrial power supply
Power Consumption
Standby<10W, Full load af<120W, at<240W
LED
System: SYS (Green), PoE: PoE (Green) , Fiber port: L/A (Green), Network: Link (Yellow
Reset switch
Yes (Press and release for 10 seconds, the PoE switch will restore to factory settings)
Dimensions
165 x 148 x54 mm
Weight
1.3kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us