Menu
Menu
Previous
Next
18 Ports 10/100/1000M Industrial Switch with 16x 1G RJ45 & 2x 1G SFP - LIOX18-2SFP
LIOX18-2SFP is a 16 x 10/100/1000M RJ45 and 2x 1G SFP port Industrial switch. It supports IPV4 static routing forwarding, complete security protection mechanism, perfect ACL/QoS strategy and VLAN functions.Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and ERPS (<20ms) ring network protocol improves link backup and network reliability. When a one-way network fails, communication can be quickly restored.
Features
- 16x 10/100/1000M RJ45 + 2x 1G SFP
- Dual optical uplink ports, long-distance transmission, adapt to various ring network/chain network cascade and expansion
- Full Gigabit high-speed transmission, high-bandwidth transmission is stable and guaranteed, supports rate and flow control per port, and achieves 10M/250 Meters long-distance transmission, solving the problem of long-distance communication of network cables
- Industrial -grade bandwidth switching chip, backplane, cache, reducing network congestion
- Support IEEE802.3X full-duplex intelligent flow control, large-stream high-definition transmission without lag;
- Supports automatic MAC address learning and updating, and supports automatic port flipping (Auto MDI/MDI-X) function
- Supports 6KV surge (lightning) protection, power short circuit and overload protection, IP40 protection level, 40°Cto +75°C wide temperature design
- Aluminum alloy metal shell, heat dissipation, interference shielding, rust-proof, low power consumption, fanless, DIN35 rail installation
Specifications
| Parameters | Values |
|---|---|
|
Number of RJ45 ports (10/100BaseT)
|
16 |
|
Number of Fiber ports (100M FX)
|
2 |
|
Forwarding Mode |
Store and forward (full line speed) |
|
Network port characteristics |
1-16 ports 10/100/1000M adaptive, full/half duplex MDI/MDI-X adaptive |
|
Twisted pair transmission |
10BASE-T: Cat3,4,5 UTP(≤250 meter), 100BASE-TX: Cat5 or later UTP(≤100 meter), |
|
1000BASE-T: Cat5e or later UTP(≤100 meter) |
|
|
Light source characteristics |
Gigabit SFP fiber optic interface, no optical module is provided by default, |
|
you need to purchase it separately (optional order mode/multi-mode, single fiber/dual fiber optical mode
Block, LC/SC) |
|
|
Optical Cable |
Multimode: 850nm 0-550M, 50μm/125μm&62.5μm/125μm |
|
Single mode: 1310nm 0-40KM, 1550nm, 0-120KM, 9.5μm/125μm |
|
|
CPU |
500MHz |
|
DRAM |
1Gbits |
|
FLASH |
256Mbits |
|
Backplane |
52Gbps (non-blocking) |
|
bandwidth packet forwarding |
rate @64byte 26.78Mpps |
|
MAC address table |
8K |
|
packet forwarding cache |
4Mbits |
|
Jumbo Frames |
10Kbytes |
|
MTBF |
500,000 hours |
|
Working temperature/humidity |
-40 to +75°C / 5- 90% RH non-condensing |
|
Dimensions (L*W*H) |
195*145*48mm |
|
Net weight/gross |
>1.5kg / >1.8kg |
Related Products
© 2024 LIGHTEM® Group All rights reserved
Site Map
Menu
All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.
Contact Us
- Tel : +852 - 2687 5815
- Fax: +852 - 2687 5456
- Email: [email protected]
- Office Address: Rm 910-11, 9/F, Topsail Plaza, 11 On Sum Street, Shatin, N.T., H.K.