Go back to Industrial Switches
Previous
Next

24 Ports 10/100/1000M SMART Industrial Switch With 20x 1G RJ45 & 4x 1G SFP - LIMOX24-4SFP​

SMART Industrial switch Fiber Switch LIMOX24-4SFP is a 20x 10/100/1000M RJ45 port and 4x 1G SFP ports. Managed Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +80°C). Its casing is IP40 rated and meet EMC industrial level 4 requirements. These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

Download Catalog
Features
  • 20x RJ45port (10/100/1000M), 4x 1G SFP and 1 console port
  • L2+ features provide better manageability, security, QoS, and performance.
  • L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W). Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)
Specifications
Parameters Values
Number of RJ45 ports (10/100/1000BaseT)
20
Number of 1G SFP ports
4
SFP Expansion
Turbo overclocking 2.5G optical module and ring
Console port
YES (RS232 ; 115200,N,8,1)
Ethernet Port
support 10/100/1000Base-T,auto-sensing, Full/half duplex MDI/MDI-X self-adaption
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ; 100BASE-TX: Cat5 or later UTP(≤100 meter) ; 1000BASE-T: Cat5e or later UTP(≤100 meter)
Optical Cable/ Distance
Multi mode: 850nm / 0 ~ 500M, single mode: 1310nm / 0 ~ 40KM, 1550nm/ 0 ~ 120KM
Network Protocol
IEEE802.3 10BASE-T, IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX , IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X ; IEEE802.3x
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
256Gbps
Forwarding Rate@64byte
35.7Mpps
MAC
8K
Buffer Memory
8M
Jumbo Frame
9.6K
Reset Switch
Yes, One-button factory reset
Power Consumption
Standby<20W, Full load<30W
Total PWR / Input Voltage
36W /48VDC
Working Voltage
12-48VDC, 6 Pin industrial Phoenix terminal, support anti-reverse protection.
Power Supply
No, optional 24V/36W or 24V/60W industrial power supply
Operation TEMP / Humidity
40~+80°C;5%~90% RH Non condensing.
Storage TEMP / Humidity
40~+85°C;5%~95% RH Non condensing.
Dimension (L*W*H)
166*149*89mm
Net /Gross Weight
<2.2kg / <2.8kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us
  • Tel : +852 - 2687 5815
  • Fax: +852 - 2687 5456
  • Email: [email protected]
  • Office Address: Rm 910-11, 9/F, Topsail Plaza, 11 On Sum Street, Shatin, N.T., H.K.