36 Ports 10/100/1000M SMART+ Industrial switch with 8x 1G RJ45, 24x 1G SFP & 4x 1/10G SFP+ - LIROX36-24SFP-4TG

SMART+ Industrial switch Fiber Switch LIROX36-24SFP-4TG is a 8x RJ45port 10/100/1000M, 24x 1G SFP, 4x 1/10G SFP+ ports Managed (L3) Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +85°C). These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

 

Features
  • 8x 10/100/1000M RJ45 ports, 24x 1G SFP, 4x 1/10G SFP+ slots, and 1 console port
  • Better manageability, security, QoS, and performance.
  • L3 features IPV4/V6 management, static route
  • L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W). Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)

 

Specifications
Parameters Values
Number of RJ45 ports (10/100/1000BaseT)
24
Number of 1000M SFP ports
8
Number of 1/10G SFP+ ports
4
Console port
yes (RJ45-RS232)
Reset Button
yes
Network Management Type
L3
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T ; IEEE802.3z 1000Base-X; IEEE802.3ae 10GBase-SR/LR; IEEE802.3x
Ethernet Port Feature
10/100/1000Base-T,Auto-sensing,Full/half duplex MDI/MDI-X, self-adaption
Fiber Port Feature
Gigabit SFP /10G SFP+ fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
598 Gbps
Forwarding Rate@64byte
107.14 Mbps
Buffer Memory
32 mb
MAC Address Table
32k
Jumbo Frame
9.6K
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter)
Optical Fiber Cable
Multi-mode:850nm 0~300M(10G) ,850nm 0~500M (1.25G); Single-mode:1310nm 0~40KM,1550nm 0~120KM.
PowerConsumption (Max Power Per Port)
Standby<25W; Full Load<130W (30W)
Power Supply
Built-in power supply, AC 100~240V 50-60Hz 2.3A
Power Input Interface
Dual input power interface, AC power supply priority,connection; 2 sets of DC48-57V input interface;
support anti-reverse protection, power-off automatic switching DC ;
connection; 2 sets of DC48-57V input interface; alarm switch ; 1 set of AC power input interface
LED Indicator
Power:PWR(yellow); system:SYS(yellow);network;Link(yellow);PoE:PoE (green);Fiber port:L/A(green)
Operation /Storage TEMP (Humidity)
-40~+80°C / -40~+85°C (5%~90% RH Non condensing)
Dimension (LxWxH)
440*298*44mm
Net /Gross Weight
<5.0kg / <5.8kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us