Menu
Menu
Previous
Next
2 Ports 10/100/1000M Industrial POE Switch with 1x POE RJ45 ports and 1x SFP - LIPOX2-1SFP
LIPOX2-1SFP is a 1x 10/100/1000M POE RJ45 port and 1x SFP port Industrial POE switch. Its casing is IP40 rated and meet EMC industrial level 4 requirements. Features 6KV network port surge protection which is important for harsh outdoor environment and ensure the reliability of the uninterrupted system.
Features
- 1 Port 10/100/1000M RJ45 with Auto Uplink™ , 1 port 100M SFP
- IEEE802.3AF (15.4W per port) or IEEE802.3AT (25.5W per port)
- Harsh industrial environment or higher requirement
- -40°C ~ +85°C operating temperature range
- Link Fault Pass-through (LFP)
- Automatic MAC address learning and aging
- Support IGMP (Multicasting)
- 10/100/1000MMbps Auto-negotiation , auto-MDI-MDI-X LED indicators for monitoring power/link/activity
- Supports 10/100/1000Mbps-Full/Half-duplex
- Supports Wall-mount and DIN-Rail installation for lightning protection
- Supports Daisy-Chain connection & Broadcast Storm Control
- Supports Relay output for power failure
- Super lightening protection, IP40 protection
- Excellent heat elimination without cooling fan
- Redundant dual DC power inputs
Specifications
| Parameters | Values | |
|---|---|---|
|
Interface |
1 x 10/100/1000Base-T RJ45 port + 1x 100Mbps SFP |
|
|
POE power |
15.4W per POE port (IEEE802.3af);
30W per POE port (IEEE802.3at) |
|
|
Network Protocols |
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX; |
|
|
|
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
|
|
|
Network Media |
10BASE-T: Cat3,4,5 UTP(≤100 meter);
10BASE-T: Cat3,4,5 UTP(≤100 meter) |
|
|
|
100BASE-TX: Cat5 or later UTP(≤100 meter) |
|
|
|
1000BASE-TX: Cat6 or later UTP(≤100 meter)
|
|
|
Bandwidth |
1Gbps
|
|
|
Packet Buffer Memory
|
512k
|
|
|
Packet Forwarding Rate |
7.44Mpps/port |
|
|
MAC Address Table |
1k
|
|
|
Forwarding Mode
|
Store-and-Forward |
|
|
Protection |
6KV Lightning protection, IP40 protection |
|
|
LED Indicators
|
Power: PWR; Link; PoE; Link/Act
|
|
|
|
Input Voltage: DC52V (48¬57V) /Terminal block
|
|
|
Power Consumption |
Standby:<4W; Full load:<18W |
|
|
Working temperature |
-40°C+ ~ 85°C |
|
|
Storage temperature |
-40°C+ ~ 85°C |
|
|
Relative Humidity |
5%~95 %(no condensation) |
|
|
Installation
|
DIN-Rail or Wall mounting |
|
|
Dimension
|
119 x 100 x 30 mm |
|
|
Weight |
0.5kg |
|
Related Products
© 2024 LIGHTEM® Group All rights reserved
Site Map
Menu
All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.
Contact Us
- Tel : +852 - 2687 5815
- Fax: +852 - 2687 5456
- Email: [email protected]
- Office Address: Rm 910-11, 9/F, Topsail Plaza, 11 On Sum Street, Shatin, N.T., H.K.