52Ports 10/100/1000M SMART Industrial POE Switch with 24x POE RJ45, 32x RJ45 and 4x 10G SFP+ ports

SMART Industrial Fiber Switch LIMPOX52-32Px-4TG features 24x 1G POE RJ45, 32x 1G RJ45 and 4x 10G SFP+ ports. It supports wide operating temperature (-40 to +80degreeC). Its casing is IP40 rated and meet EMC industrial level 4 requirements. These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

 

  • SMART Industrial POE switch with 24x 1G POE RJ45, 32x 1G RJ45 and 4x 10G SFP+ ports
  • L2+ features provide better manageability, security, QoS, and performance
  • Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc
  • Support spanning tree STP(802.1D) and RSTP(802.1W)
  • Jumbo frames support up to 9.6K kilobytes
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP
  • Support cable diagnosis
  • Supports both IEEE 802.3af and 802.3at (4ports), and every port PoE configuration function
  • G.8032, support less than 50ms industrial quick ring protection
52Ports 10/100/1000M SMART Industrial POE Switch with 24x POE RJ45, 32x RJ45 and 4x 10G SFP+ ports
Number of POE RJ45 ports (10/100/1000BaseT) 32
Number of RJ45 ports (10/100/1000BaseT) 16
Number of 10G SFP+ ports 4
Layer2 switching
Spanning Tree Protocol (STP) Standard Spanning Tree 802.1d
  Rapid Spanning Tree (RSTP) 802.1w
G.8032 ERPS <50ms ring protection for industrial ring application
Aggregation Link Aggregation Control Protocol (LACP) IEEE802.3ad; up to 7 groups &
14ports per group
VLAN Support up to 4k VLANs simultaneously (out of 40906 VLAN IDs); Port based
VLAN; 802.1Q tag based VLAN
IGMP v1/v2 snooping IGM limits bandwidth intensive multicast traffic to only the requesters.
Support 1024 multicast groups (source-specific multicasting is not supported)
POE
 
standard /type IEEE802.3af/at, END SPAN
Max POE Power per port 15.4W per port (IEEE802.3af) & 30W per port (IEEE802.3at), total 4ports
Security  
Secure Shell (SSH) Protocol SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported
Secure Sockets Layer (SSL), HTTPS SSL encrypts the http traffic, allowing advance secure access to the browser-based
management GUI in the switch
Port Security Locks MAC Addresses to ports, and limits the number of learned MAC addresses
DHCP Snooping prevent unauthorized configuration and use of IP addresses, while providing
support for IP Source Guard and ARP detection
IP Source Guard Prevents datagram with spoofed addresses from being in the network
ARP Inspection Prevent ARP spoofing attacks and ARP
Storm Control Prevents traffic on a LAN from being disrupted by a broadcast, multicast,
or unicast storm on a port
ACLs Support for up to 256 entries; Drop or rate limitation based on source
and destination MAC, VLAN ID or IP address, protocol, port, differentiated
services code point (DSCP) / IP precedence, TCP/ UDP source and destination
ports, 802.1p priority, Ethernet type, Internet Control Message Protocol
(ICMP) packets, IGMP packets, TCP flag
Qualtiy of Service
 
Hardware Support 8 hardware queues
Scheduling 8 COS queues per port support strict priority and weighted round-robin
(WRR)
Classifications Port based; 802.1p(PCP) VLAN priority based;
Rate Limiting Ingress policer;egress shaping and rate control;per VLAN,per port and
flow based
Management (Web/ SSL, Telnet/ SSH, ping,
Trivial File Transfer Protocol (TFTP), SNMP, Syslog)
Web GUI Built-in switch configuration utility for browser-based device configuration
(HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and
monitoring
Dual Image Dual image provides independent primary and secondary OS files for backup
while upgrading
Firmware upgrade Web browser upgrade (HTTP/ HTTPs) and TFTP;??Upgrade through console port
as well
Port mirroring Traffic on a port can be mirrored to another port for analysis with a
network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can
be mirrored to single destination port. A single session is supported.
Others Single IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable
diagnostics; ping; syslog; Telnet client (SSH secure support)
Green Ethernet
 
Green and Energy saving Ethernet (EEE) Compliant IEEE802.3az Energy Efficient Ethernet Task Force. Automatically
turns off power on Gigabit Ethernet RJ-45 port when detecting link down
or Idle of client. Active mode is resumed without loss of any packets when
the switch detects the link up
Cable length detection Adjusts the signal strength based on the cable length. Reduces the power
consumption for cables shorter.
General  
Jumbo frames Frame sizes up to 9KB supported on Gigabit interfaces
Discovery  
Link Layer Discovery Protocol (LLDP) Used by network devices for advertising their identities, capabilities,
and neighbors on a IEEE 802 local area network, principally wired Ethernet.
Min Requirements
 
  Web browser: Mozilla Firefox version 2.5 or later, Microsoft Internet
Explorer version 6 or later; Category 5 Ethernet network cable; TCP/IP,
network adapter, and network operating system (such as Microsoft Windows,
Linux, or Mac OS X) installed on each computer in network
Dimensions 440x290x45mm
Working Environment Operating temperature: -40 to 75 ℃; Storage temperature: -40℃ to 75 ℃;
Operating humidity: 10% to 90% , relative, non-condensing
Power Supply AC 100-240V or DC 52V
Power Consumption 400W (15.4W per POE port) / 600W (25.5W per POE port)
P/N Description
LIMPOX52-32Px4TG 52Ports 10/100/1000M SMART Industrial POE Switch with 32x POE RJ45, 16x RJ45 and 4x 10G SFP+ ports
x-
F: IEEE802.3af (15.4W per port)
  T- IEEE802.3at (25.5W per port)