10ports Layer 2 Data Center Switch with 8x 1/10G RJ45 & 2x 10G SFP+ ports

Lightem LTG10-2SFP+ 10 Gigabit data center switch. It provides 8x 1/10G RJ45 ports & 2x 10G SFP+ optical ports. With high bandwidth and low latency, pipe network. It located in density of the next generation of data center and cloud computing network access, can also be used for large Internet cafes, the core of enterprise network, metropolitan area network, or gathering.

 

  • 200G backplane bandwidth
  • 8x 1/10G RJ45 & 2x 10G SFP+ ports, the highest density (1U TOR), meet the demand of high-density 10G server access
  • Hardware routing, the packet forwarding rate of the wire speed layer 3 switching has reached 148.8Mpps, L2 / L3 full speed forwarding
  • Management support with Web,SNMP and Telnet
  • Support XModem protocol,use TFTP/ZMODEM to software upgrading and BootRom upgrading
  • Support SFP+, also backwards compatible XFP
  • Support 10G Base-T,be compatible with 1000M/100M Base-T.Max forwarding distance can reach 100M with Cat6
10ports Layer2 Data Center Switch with 8x 1/10G RJ45 porst & 2x SFP+ ports
Number of RJ45 (1/10G) 8
Number of Optical ports (SFP+ 10G) 2
Console port 1
Backplane bandwidth 200Gbps
Packet forwarding rate 148.8Mbps
Jumbo Frames 1522 byte
Transfer Mode Support store-forward mode and cut-through mode
Packet Buffer 2MB
Flash memory capacity 16Mb
Memory capacity 512M DDR3 SD Ram
CPU 600 MHz ARM Cortex-A9 single-core processor
Security Feature P+MAC+PORT+VLAN binding
  ARP inspection
  DOS prevention
  Port protection
  IP source port protection
VLAN Port-based VLAN
  802.1Q VLAN
  IP based VLAN
  MAC based VLAN
MAC Address table Static MAC address table
  Dynamic MAC address table
Storm Control Broadcast suppression
  Multicast suppression
  DLF suppression
  Limiting rate
Flow control Half-duplex control based on the back pressure type
Full-duplex control based on the PAUSE frame
Port mirroring Support port mirroring
Port Management General setting
  Port counting
  Configuring port
  Port trunking
Port-isolation
Quality of service IEEE 802.1Q Congestion mechanism
  Each port has 8 transmitting queues mapping 802.1p 8 priority
IP Services Ping dectection
  DHCP Snooping
Spanning Tree MSTP(802.1s), STP, RSTP
Multicast Management IGMP Snooping multicasting packets detection
System Management Support SNMP v1/v2
  Support Console
  Support TELNET
  Support WEB interface
Remote Upgrading Support version upgrading via web
  Support version upgrading via local
Physical Characteristics  
Dimension 440x284x44mm
Power supply AC 90V ~ 290V 50~60Hz, <100W
Operating temperature 0-50℃ operation
Operating humidity 0-90% no condensation
Model Description
LTG10-2SFP+ 10ports Layer 2 Data Ceter Switch with 8x 1/10G RJ45 & 2x 10G SFP+ ports